Top street lights factory

Best customized led flood light provider: Generally, more watts mean more light but with a higher electrical consumption. A vast area will require floodlight with more lumens. For example, a sports venue may need up to multiple decades of lumens, whereas a house’s backyard may need only 1,000 lumens. Color temperature – It defines the color of light emitted from a light source. It is measured in Kelvins (K). High color temperatures up to 5000-6000K give cooler bluish-white light, whereas lower temperatures (~3,000K) represent a warm yellowish light source. Here are some of the floodlight color temperatures: Warm White (2700K-3000K), Neutral White (3500K-4000K), Cool White (4500K-5000K), Daylight (5500K-6500K). See extra info at street light factory.

IK stands for Impact-Kinetic. Similar to ingress protection, impact protection, or the IK rating, also tells a big story in a number. If an LED roadway light manufacturer mentions an IK09 rating in its product specs, the product has an impact resistance of 10 joules. It is equivalent to a 5-kg object dropping from 20cm in height. A typical roadway lighting LED consists of aluminum as the base material and acts as a heatsink. However, thermal pastes and pads play a vital role in ensuring the heat is conducted from the LED chip to the case and the driver and adequately dissipated to the environment. High-end street lights use high-quality and adequate quantities of thermal paste and padding underneath the substrate or PCB to ensure proper heat transfer. Similarly, the driver is also thermally bonded with the casing through adhesives, pads, and thermal pastes. There are a couple of things to look for in an LED roadway light: the body should be made of high-conductivity material, the design may include a fin-like structure outside, and all the heat-generating components should be heatsinked appropriately.

The waterproof problem of the lamp: How should the lamp holder be waterproof? Many street lamp manufacturers take this into consideration when they produce LED street lamp caps. Most street lamp caps are waterproof. Not only that, many led outdoor street lights have protection grades of IP65 or IP66, which can completely prevent dust from intruding, and will not seep in rainstorms, and are not afraid of bad weather. However, it cannot be generalized. The waterproof performance of LED street lights also depends on the manufacturing capacity and level of street lamp manufacturers. Large manufacturers can be more trustworthy, but small workshops may not be able to guarantee the quality. It is recommended to confirm the test report of the product before purchasing.

CHZ Lighting is a professional lighting manufacturer integrating production and sales. With more than 10 years of lighting experience, we provide our customers with high quality LED lighting products and lighting solutions. Our products include street lamps, solar street lamps, floodlights, factory lights, garden lights, tri-proof lights, panel lights and tube lamps. We have assisted customers in Europe, America, South America, Southeast Asia, Africa and other countries to successfully complete roads and highways. Parking lots, airports, terminals, factories, shopping malls, shops, squares and other lighting projects have won wide acclaim from customers. By comparing product quality, actual energy saving after use, professional and timely communication process, and after-sales service, they have recognized the advantages of our company and deepened their loyalty. Hope to provide quality services to more customers, welcome to visit our company.

Tube Lighting is also commonly known as LED fluorescent tube, LED tube lamp, etc, and its light source uses LED as the illuminator. The traditional fluorescent tube is also called a fluorescent lamp. There is a filament at each end of the lamp. The tube is filled with a small amount of argon and thin mercury vapor. The inner wall of the tube is coated with phosphor, and the gas between the two filaments emits ultraviolet light when it conducts electricity. Let the phosphor emit visible light. Due to the heavy metal pollutant “mercury”, the environmental pollution of scrapped fluorescent tubes is very serious.

Our LED light fixture can be divided into indoor LED lighting and outdoor LED lighting according to the place where LED lamps are used. Indoor lighting requires high brightness, good color consistency, high color rendering, and high versatility. Outdoor lighting requires high brightness, long life, and good resistance to harsh environments. Our LED lamps feature high luminous efficiency, low energy consumption, long life, safety, and environmental protection. They can operate for more than 50,000 hours without failure, widely used in factories, warehouses, shopping malls, roads and other public places that require long-term lighting.

LED garden lights are a kind of outdoor lighting. It uses a new type of LED semiconductor as the illuminant. It usually refers to the outdoor lighting that illuminates an area less than 6 square meters. Its main components include an LED light source, enclosure, pole, and flange. The disc and the basic embedded parts are composed of 5 parts. It is mainly used to light up large-area mines, building outlines, stadiums, overpasses, monuments, parks, and flower beds. In fact, almost all large-area lighting fixtures used outdoors can be regarded as spotlights. Applicable occasions: Suitable for shopping malls, exhibition halls, parking lots, playgrounds, gyms, parks, building facade and public corridor, stair corridor and other indoor and outdoor lighting.

Enclosure: Using efficient Fishbone radiator with elegant appearance. The die-cast aluminum housing is electrostatically sprayed, sprayed with a polyester powder coating, treated with an anti-corrosive primer, and cured in a 180oC oven. Cable: Using silicone rubber cable for safe and efficient power input. It is secured in the cable gland with screws. Warranty: 5 year warranty for the entire lamp. Do not attempt to disassemble the casing as this will break the seal and invalidate all warranties. Certificates: ENEC, TUV, and RoHS. Quality Control: Strict testings including high and low temperature testing, waterproof testing, shock testing, aging testing, tensile testing, salt spray testing, are conducted to ensure long-term performance. Discover additional information at https://www.chz-lighting.com/.

Brightness: This is a measure of the magnitude of light produced by each lamp. There are street lamps that can deliver light to a circumference of up to 100m. Such light is critical in illuminating more oversized items that would otherwise be darkened at night. Most public spaces, such as open markets, depend on this brightness to continue transacting even at night. Most of these street lamps have an in-built photo sensor that ensures that the lamp is only on in low light conditions. In other words, the manufacturers of these lamps have been critical in ensuring that all the lamps operate only at night or in places where the lighting is poor. The LED lights do not function effectively during the day.

Casing: Choice of Material and Engineering Design – Casings combine different metals and optics. Aluminum forms the base, iron or stainless steel forms the connection portion, and polycarbonate or glass makes up the front light cover. Each material exhibits properties relevant to a buyer’s purchasing decision. Most LED roadway light manufacturers choose aluminum, providing 237 W/mf heat transfer capability. LEDs produce heat when operating, which makes metal a great case material. Aluminum, in particular, has good corrosion resistance and is easier to manufacture than other materials. Its 2.7g/cm3 density makes it lighter than the same LED light base made with iron, which has a 7.8g/cm3 density.