Alloy wheel wholesale provider with jjjwheel.com

Alloy wheels provider in China? Mistake : the larger the size of the wheel, the better. Many people modify the original intention of the hub is actually simple and rough: good look! The wheel size is larger, the vehicle effect looks bigger, more powerful. To be frank, it’s even higher! But blindly increase the size of the wheel hub,calipers, baffle, suspension system is easy to hit, even lead to heavy damage the vehicle suspension system and increase fuel consumption. General conventional wheel hub modification or upgrade to a maximum of 2 inches is appropriate, but also pay attention to the collocation of tire specifications, tire diameter change <3%. Otherwise it will affect the accuracy of the code table, even may receive a lot of tickets for no reason. Read additional information at alloy wheels supplier.

Gravity casting wheels:This is the most primitive processing method for aluminum alloy wheels, which can be formed by pouring high-temperature liquid metal into the mold and cooling it. This method is efficient and low cost, but the uniformity of each part of the manufactured wheel is poor, and the molecular density is relatively low, resulting in low strength, so it is not very suitable for high-strength use of passenger vehicles.

One is size: don’t blindly increase the hub. Some people increase the wheel hub to improve the performance of the car. Under the condition that the outer diameter of the tire remains unchanged, the large wheel hub is bound to match the wide and flat tire. The lateral swing of the car is small, and the stability is improved. pass by. However, the flatter the tire, the thinner the thickness, the worse the shock absorption performance, and the greater the sacrifice in terms of comfort. In addition, the tires are easily damaged if there are some roadblocks such as stones. Therefore, the cost of blindly increasing the hub cannot be ignored. Generally speaking, it is most appropriate to increase one or two sizes according to the size of the original wheel hub.

Fuel vehicle: If you use fully synthetic engine oil, a small maintenance every 10,000 kilometers, a single cost of 600 dollar, then 100,000 kilometers need to be maintained 10 times, the total cost is 6,000 dollar, a major maintenance every 30,000 kilometers, a major maintenance Counting 1,000, 100,000 kilometers of maintenance 3 times, the cost is 3,000, so calculated, the total maintenance cost of 100,000 kilometers is 9,000 dollar.

One piece forged wheels,Milling and forging,The use of impact or pressure to deform the metal between the upper and lower two against the iron (anvil) to obtain the required block of blanks, blanks after heat treatment and then through the machining center milling and forming, a piece of relatively lighter weight, can achieve the most lightweight dynamic balance better reliability, no hidden gas leakage. The main advantages of steel hubs are simple manufacturing process, relatively low cost and strong resistance to metal fatigue. But the disadvantages are also obvious, such as heavy weight, large inertial resistance, poor heat dissipation and so on.

We not only have the traditional low-pressure casting technology, but also have the high strength and light weight manufacturing technology of “low-pressure casting + spinning”. We always maintain various advanced technology advantages in aluminum alloy wheel manufacturing to meet customers’ needs and lead the industry development. The formula has perfect testing equipment, including material testing machine, hardness tester, solid aluminum alloy containing slag quantitative tester, X-ray diffractometer, bending fatigue tester, radial fatigue tester, biaxial fatigue tester, 13° impact tester, 30°/90° impact tester, salt spray test chamber, humidity and heat test chamber, etc., which can carry out the four major testing areas of wheels (dimensional testing, alloy material performance, reliability and safety, coating. See even more details on https://www.jjjwheel.com/.